Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 137)

Mapping Plane Scale Factor
127
Accessing the Scale Factor Settings
The Scale Factor settings are used to configure a mapping plane scale
factor for the current job and are accessed in two different ways:
Scale Factor for New Jobs
When a job is being created, the second screen of the
New Job wizard contains a Use Scale Factor checkbox.
When checked, the Scale Factor settings will start as
soon as the New Job wizard finishes. This setting is
always unchecked by default.
Scale Factor for Existing Jobs
For existing jobs, the Scale Factor wizard can be
accessed from the Job > Settings > Surveying screen by
tapping the Setup Scale button. The area directly above
this button provides details on the current scale factor
configuration.
Whenever changes are made to the scale factor, you will
return to this screen when the Scale Factor settings are
configured. This screen will display the new settings and
remind you to “Tap OK to update scale settings.” You
must then tap to save the changes. If you cancel out of
this screen, any changes will be lost and the scale factor
will revert to the previous configuration.