Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 296)

User’s Manual – GPS Mode
286
• Unique: the solution was calculated using the
minimum number of control points or fewer. In
this case, there is no least squares solution to
provide residuals, so the numbers in the N Err, E
Err
, and/or V Err columns are misclosures
calculated from the control points that are not
used in the solution.
• LSQ: the solution was calculated with more than
the minimum number of control points. In this
case, the least squares solution can produce
residuals, and the N Err, E Err, and/or V Err
columns show residuals for the points that are
used in the solution.
11. If you are not happy with the solution residual or misclosure
values for any point, you can change the control points used by
tapping in the H and/or V columns. This will change Next> to
Solve>. Tap Solve> to recalculate the solution and update the
residual / misclosure display.
12. When you are happy with the solution quality, tap Next> to
review the parameters.
13. Examine the scale and rotation values to verify they are
reasonable. See the explanation of localization parameters (Page
288) to determine what is reasonable.