Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 85)

Conventional Fieldwork
75
i. Tap (OK). The Map View will automatically
open showing your current setup. Tap (Close)
to continue.
Staking Points
4. Stake the first design point (Point 2).
a. Access the Stakeout , Stake Points . screen from
the Main Menu. The backsight information is
displayed near the bottom of the screen. At this
point, it is assumed your total station is over the
occupy point and its horizontal angle was zeroed
while aiming toward the backsight.
b. Enter the following data in the Stake Points
screen:
Design point: 2
Increment: 1
Height of rod: 5 and tap Solve > .