Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 125)

DTM Stakeout
115
Stake the DTM
13. With the information correctly entered in the Stake DTM screen,
tap Next > to continue.
14. The second Stake DTM screen will open with a
graphic that shows the reference DTM, the
centerline, if used, and any break lines. Tap the Take
Shot… button to take a shot.
15. If a shot is taken when the prism is located within
the boundaries of the reference DTM and within the
polyline boundary (if selected earlier), the graphic
will change and the Data, Result , and Centerline (if
one was selected) cards will be filled in. The graphic
will show the current triangle in the reference DTM
surface where the rod is located and a centerline and
offset, if selected earlier.