Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 310)

User’s Manual – GPS Mode
300
8. Choose an action to take after Survey Pro creates the GPS control
points selected. You can choose from:
• Automatically solve localization (calibration): Use this option to
create the selected GPS control points, and automatically
solve the localization, without opening the Solve Localization
wizard. The Readjust with Projection screen opens showing
you a preview of the update to the job file coordinates to be
applied with the new localization solution.
• Open the solve localization (calibration) wizard: Use this option
to create the selected GPS control points and then open the
Solve Localization wizard. You can then use the Solve
Localization wizard to complete the localization solution. This
option is useful if you are creating multiple control points and
you wish to view the residuals of the localization solution
prior to accepting.
• Solve the localization (calibration) later: Use this option to
create the selected GPS control points and exit. You can tap
Survey > Projection > Solve Localization at any time after this
to finish solving the localization using the created control
points.
9. Tap Finish to create the GPS control points and take the selected
action.