Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 28)

User’s Manual
18
Power Buttons
The Backsight Setup screen contains two power buttons. Power
buttons are typically used to provide alternate methods of entering or
modifying data in an associated field. To use a power button, simply
tap it. Once tapped, a dropdown list will appear with several choices.
The choices available vary depending on with which field the power
button is associated. Simply tap the desired choice from the dropdown
list.
Tapping the first power button in the Backsight Setup screen allows
you to specify an occupy point using other methods or view the details
of the currently selected point. You should experiment with the
options available with various power buttons to become familiar with
them.
Choose From Map Button
The Choose From Map button is always associated with a field where
an existing point is required. When the button is tapped, a map view
is displayed. To select a point for the required field, just tap it from
the map.
Note: If you tap a point from the map view that is located next to
other points, another screen will open that displays all of the points
in the area that was tapped. Tap the desired point from the list to
select it.