Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 213)

Leveling
203
Level Settings
The Level Settings screen is where the shooting sequence
and leveling tolerances are configured. Fill in the screen
as necessary. If any shots exceed the tolerance specified
and the corresponding checkbox is checked, a prompt will
appear to warn you. Consult the Reference Manual for
more information on the individual fields in this screen.
The Load FGCS Defaults button will open the FGCS
Defaults screen where you can specify a particular order
and class for the level loop. This will then automatically
fill in all the tolerances on the previous screen with the
default FGCS values.
Note: It is important to recognize that Survey Pro can
only display a warning if tolerances are not met. It is up
to the surveyor to determine if the level loop meets the
criteria for a particular standard.