Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 106)

User’s Manual – Conventional Mode
96
Add Templates to the Alignment
1. Tap Roads , Edit Roads from the Main Menu to open the
Add/Edit Roads screen.
2. Since we are creating a new road, tap New… to open
the New Road screen.
3. With the Road tab selected, enter a name for the
road in the Road Name field. In this example, we
used Example.
4. Tap the Choose Alignment… button and select an
alignment. In this example, we selected the Roadway
alignment created on Page 50. Tap to continue.
5. Tap the Set POB… to open the Road Alignment
Properties screen to define where the road begins in
the job.
6. Enter the following data then tap :
North: 5000
East: 5000
Elev: 100
Start Station: 0+00
7. The next step is to add the templates. We will use
the template created earlier to define both sides of
the road. Tap the Templates tab.