Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 62)

User’s Manual
52
Horizontal Alignment
4. Tap the HAL (Horizontal Alignment) tab and then tap
the Insert button. This will open the Edit Segment
screen where the first horizontal alignment segment
can be defined.
5. Tap the Line tab to insert a straight line segment.
Enter a Length of 100 and an Azimuth of 0.
6. Tap to add the segment to the horizontal
alignment. You will return to the Edit Alignment
screen where the new segment is displayed. The
graphic shows every horizontal segment entered so
far with the selected segment in bold. The dot in the
picture indicates the beginning of the selected
segment (in this case it is the end). This is where the
next segment will be placed when using the Insert
button.