Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 148)

User’s Manual – Conventional Mode
138
Exporting Coordinates
The steps below will copy selected points from the current job to a
new job in a specified file format.
1. Select . File , Export from the Main Menu to open the Export
screen.
2. Select the type of file you are exporting coordinates to and tap
Next> .
3. You can select the desired points to export using any of the
following buttons:
• Tap Points… allows you to select points by tapping them
from a map view.
• To/From… allows you to specify a range of points to export.
• allows you to select all points; select all control points; or
select points by their description.
4. If a JOB format file was selected, tap Export.
If a CR5 format file was selected, tap Next> . You must then
specify if you want to create a Sequential or Non-Sequential file.
Note: The HP 48 platform can only open sequential CR5 files.
If a TXT format file was selected, tap Next> . This will lead to
two additional screens where the desired format of the text file is
configured. For an explanation of the available options, refer to
the Reference Manual.
5. The Save As dialog box will open. Specify a file name for the new
file in the Name field and tap Save . (The file extension is
automatically added for you.)