Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 185)

Other Tutorials
175
Map Check
The Map Check screen is used to enter distance and direction
information from a map for straight and curved sections to compute
closure, and other information from the entered boundary.
Entering Boundary Data
Each straight and curved section of the boundary is entered using the
Add Line… and Add Arc… buttons in the order that the sections occur
on the map.
1. From the Main Menu, tap . Cogo , Map Check .
2. To add a straight section, tap the Add Line… button
to open the Add/Edit Line screen.
3. Toggle the Azimuth / Bearing button to the desired
setting and then enter the direction in that field.
4. Enter the length of the straight section in the Length
field and tap .
When you return to the Map Check screen, the straight
section is displayed in a map view in the right-hand
portion of the screen, along with any previously entered
sections.
1. To add a horizontal curve to the boundary, tap the
Add Arc… button
2. Describe the curve in the Add/Edit Curve screen.
3. Tap when finished.
Each section is added to the end of the previous section until all the
sections are entered. When you are finished, you can view the details
of the entered boundary by tapping the Results tab. You can also
merge the entered data with the current project, described later.