Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 205)

Other Tutorials
195
7. If a Compass Rule
adjustment is being
performed, the screen
shown here will open.
Select Closed Traverse if
you are adjusting a closed
traverse or select Close to
Known Location if you are
adjusting an open traverse
and closing to a known
point or location. A closing
location can be defined by
an existing point or known
coordinates by toggling
the Point / Location
button accordingly.
Note: if closing to a known location and a
closing location is not specified, it is
automatically assumed that the first point
of the traverse will be the closing location.
8. Tap Next > to open the final screen of
the adjustment wizard, which displays
the changes that will be made by the
adjustment where they can be
previewed before the actual
adjustment is applied.
The screen lists the adjustment details
in three main sections: the angle
adjustment details; the compass rule
adjustment details, and the point
details where the before-and-after
coordinates for each point are listed.
An example of the information
provided in this screen is shown here.
9. If you are satisfied with the changes that will be made by the
adjustment routine, tap Adjust to perform the adjustment.