Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 349)

Basic GPS Module
339
11. Tap to close this screen and return to Survey
Pro.
Basic GPS Start Survey
To start a survey with the Basic GPS module, plug in the serial cable
or connect the Bluetooth dongles and tap Survey > Start GPS Survey.
The software will walk you through the rest of the process, which will
be determined by the type of modem data link you are using and
which receiver you are connected to.
When connected using a serial cable, the software will detect if you
are connected to the base or rover and start the set base or set rover
workflow accordingly.
When connecting by Bluetooth, you will be asked which
receiver you are connecting to since a connection could
possibly be made to either receiver.
The different pages of the Start Survey wizard are
described below individually. After that, the sequence of
pages is described for different workflows.