Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 76)

User’s Manual – Conventional Mode
66
c. For this example, tap the Surveying card and un-
check all the checkboxes.
d. Tap (OK) to save the job settings.
3. Add a backsight point to the job.
a. Select Job , Edit Points from the Main Menu.
b. Tap Insert… and
enter a new point
using the General
and Location cards
with the following
values, as shown:
Point Name: 2
Northing: 5050
Easting: 5050
Elevation: 100
Description:
Backsight
and then tap .