Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 171)

Other Tutorials
161
Taking a Shot in Remote Mode
When running in a non-remote mode, tapping the
Traverse or Side Shot button will simply trigger the total
station to take a shot. When running in remote mode,
tapping these buttons will open the Remote Shot screen.
The Remote Shot screen is nearly identical to the Remote
Control screen except it has an additional button that
allows you to trigger the total station to take a shot. The
screen is used to properly align the total station with the
prism prior to taking a shot. Once the total station is
aligned, a shot is taken by tapping the
Take Shot button.
If the Remote Shot screen was accessed by performing a
side shot, you will return to the Remote Shot screen after
the shot is completed. If the Remote Shot screen was
accessed by performing a traverse shot, you will return to
the Traverse / Sideshot screen after the shot is completed.