Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 200)

User’s Manual – Conventional Mode
190
Translate by Coordinates
The Translate by Coordinates method requires that you define a
starting location and an ending location. The adjustment will then
move all of the selected points in the direction and distance as defined
between the starting and ending locations.
• Check the Translate by Coordinates checkbox.
• In the From area, enter the starting location by
tapping the Point / Location button and
either specify an existing point name or enter
coordinates.
• In the To area, define the ending location in the
same way as you did for the starting location.
• Tap Solve. The selected points will be adjusted in
the same direction and distance as between the
starting and ending location.