Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 52)

User’s Manual
42
Features
The primary part of a feature code is called a feature. Features
generally describe what an object is. Two types of features are used in
Survey Pro: points and lines, which are described below.
When assigning a feature to data that was collected in Survey Pro,
only features of the same type are available for selection. For
example, if selecting a feature to describe a point in a job, only the
point features are displayed. Likewise, if selecting a feature to
describe a polyline, only the line features in the feature file are
displayed.
• Point Features
A point feature consists of a single independent point.
Examples of a point feature would be objects such as a tree, a
utility pedestal, or a fire hydrant.
• Line Features
A line feature consists of two or more points that define a
linear object, such as a fence or a waterline. In Survey Pro,
these are stored as polylines, but line features can also be
used to describe alignments.
Attributes
A feature, by itself, would not be useful in describing a point or line
with much detail since a feature only helps describe what the stored
point is. Attributes are used to help describe the details of the object.
Attributes are either typed in from the keyboard or selected from a
pull-down menu and fall into the following three categories.
• String Attributes
A string attribute consists of a title and a field where the user
can enter any characters up to a specified maximum length.
An example of a string attribute is an attribute titled Notes
where the user would enter anything to describe a feature.
• Value Attributes
A value attribute accepts only numbers from the keypad.
These attributes are setup to accept numbers that fall in a
specified range. Some examples of a numeric attribute would
be the height of a tree or a utility pole’s ID number.