Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 353)

Basic GPS Module
343
Select NTRIP Services Screen
Once connected, tap the desired NTRIP service. Enter
your User Name and Password if the selected service
requires them and then tap Connect >. You can now
complete your GPS setup.
Setup Rover Screen
This feature is the same as the Set Rover screen (Page
341).
Setup Remote Base
1. The Setup Remote Base screen can have three
different states, which are the same as the Setup
Base Point screen described on Page 340.
The button at the bottom right of the page will say
Next > when the projection is not fully set and solved for this
survey. The button at the bottom right will say Finish if the
projection is solved.
2. Verify the correct antenna height is displayed on this screen
and tap one of the following:
• Tap Next > to write the base and rover setup raw data
and advance to the Solve Projection routine.
• Tap Finish to write the base and rover setup raw data,
closes the start survey wizard and opens data collection or
stake out.