Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 81)

Conventional Fieldwork
71
When out in the field, you would now move your total station over the
new occupy point, aim it toward the previous occupy point (the
current backsight), enter the correct instrument height in the Height
of Instrument field and tap
. Send Circle to Instrument . This would
update the Traverse / Side Shot screen and set the total station’s
horizontal angle to zero where you are then ready to collect more
data.
You have now created a job, checked the settings, setup a
backsight and collected data in the form of a side shot
and a traverse shot. If, at any time, you want to view the
coordinates of your points, you can do so from the Job ,
. Edit Points screen.
Data Collection Summary
1. Open or create a job.
2. Check the job settings.
3. Setup a backsight.
4. Collect data in the form of traverse shots or side
shots.