Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 365)

Basic GPS Module
355
Occupy Then Traverse Routine
1. Tap Occupy Then Traverse to open the Occupy Data Point
screen.
2. Tap Store on the occupy point, you are prompted
for a name and description.
3. After accepting the point, you are prompted to
connect to your base receiver.
4. On successful connection to the base, including
the retry prompt if we detect you are still
connected to the rover, the Basic Start Survey
wizard will open as described on Page 340.
Projection Solve
Localization
When you go to the Projection dialog in Basic GPS mode, and tap
[Solve Localization], the screen and workflow will be similar to the
Basic Start Survey wizard, Solve Localization and Detect Blunders
screen described on Page 349.
Post Processing
The Survey > Post Processing routine is nearly the same as with the
GPS Module described on Page 307, but instead of the behavior of
prompting for a receiver, we will instead do the automatic connection
detection in the same way as the Basic Start Survey wizard.