Spectra Precision Survey Pro v4.6 Recon and Nomad User Manual - Manual (Page 221)

Leveling
211
9. Once all the shots in the sequence are completed,
the Shot Results screen will open listing the
details for each point.
You can remove the backsight and/or foresight
shot with the worst residual by tapping the
corresponding Toss button. The shots with the
worst residuals are always removed first.
Continuing to tap the button will eventually
remove all the shots taken to that point.
You can also add additional sets for the
backsight, foresight, or both by tapping the BS…
FS… or All… button, respectively.
10. If everything on the screen is acceptable, tap
Store Observation to continue. You will return to
the Level screen shown in Step 6.
If the completed shots were for a turning point or benchmark,
you are expected to advance to the next setup where your
previous foresight will become your new backsight. If you
completed a side shot or stakeout shot, you will remain at the
current set up to shoot additional points.