Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 93)

Multi-Service IronWare Multicast Configuration Guide 81
53-1003032-02
Configuring Multicast Source Discovery Protocol (MSDP)
1
You can use the following command to filter the output to display only the SA cache entries that are
received from peers in the BGP AS Number 100.
Brocade#show ip msdp sa-cache 100
You can use the following command to filter the output to display only the SA cache entries that are
originated by the RP 1.1.1.1.
Brocade#show ip msdp sa-cache orig-rp 1.1.1.1
You can use the following command to filter the output to display only the SA cache entries that are
received from the peer 1.1.1.1.
Brocade#show ip msdp sa-cache peer 1.1.1.1
You can use the following command to display the rejected SAs. You can further narrow down by
quoting the reason for rejection.
Brocade#show ip msdp sa-cache rejected
You can use the following command to display the self-originated SAs.
Brocade#show ip msdp sa-cache self-originated
Displaying MSDP RPF-Peer
To display MSDP peer information for the RP 1.1.1.1, enter the following command.
Brocade# show ip msdp rpf-peer 1.1.1.1
MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address Peer As State KA SA NOT Age
In Out In Out In Out
40.40.40.3 1001 ESTABLISH 62 62 0 0 0 0 7
Brocade#
Syntax: show ip msdp rpf-peer ip-addr
Displaying MSDP Peer
To display MSDP peer information, enter the following command.
Brocade# show ip msdp peer 40.40.40.3
MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address Peer As State KA SA NOT Age
In Out In Out In Out
40.40.40.3 1001 ESTABLISH 62 62 0 0 0 0 7
Brocade#
Syntax: show ip msdp peer peer-addr
Displaying MSDP VRF RPF-Peer
To display MSDP peer information for a specific VRF, enter the following command.
NetIron#sh ip msdp vrf Blue rpf-peer 40.40.40.2
MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address Peer As State KA SA NOT Age