beautypg.com

Pim neighbor-filter – Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) User Manual

Page 159

background image

Multi-Service IronWare Multicast Configuration Guide

147

53-1003032-02

pim neighbor-filter

1

pim neighbor-filter

This command is to filter the neighbor routers on an interface.

Syntax

[no] [ip|ipv6] pim neighbor-filter acl name

Parameters

acl name

filters neighbor to participate in PIM.

History

Release

Command History

Multi-Service IronWare R05.5.00 This command was added to filter the neighbor

router on the interface.