beautypg.com

Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) User Manual

Page 46

background image

34

Multi-Service IronWare Multicast Configuration Guide

53-1003032-02

PIM Dense

1

Displaying all multicast cache entries in a
pruned state

Use the following command to display all multicast cache entries that are currently in a pruned
state and have not yet aged out.

Brocade(config)# show ip pim prune

1 (104.1.1.2 231.0.1.1):

e2/2,2/2(150)

2 (108.1.1.100 231.0.1.1):

e2/2,2/2(150)

3 (104.1.1.2 231.0.1.2):

e2/2,2/2(150)

4 (108.1.1.100 231.0.1.2):

e2/2,2/2(150)

5 (108.1.1.100 231.0.1.3):

e2/2,2/2(150)

6 (104.1.1.2 231.0.1.4):

e2/2,2/2(150)

7 (108.1.1.100 231.0.1.4):

Join or Prune interval

How long a PIM device will maintain a prune state for a forwarding entry.

Prune Age

The number of packets the device sends using the path through the RP
before switching to using the SPT path.

Hardware Drop Enabled

Displays Yes if the Passive Multicast Route Insertion feature is enable
and No if it is not.

Prune Wait Interval

The amount of time a PIM device waits before stopping traffic to
neighbor devices that do not want the traffic. The value can be from zero
to three seconds. The default is three seconds.

Route Precedence

The route precedence configured to control the selection of routes
based on the route types. There are four different types of routes:

Non-default route from the mRTM

Default route from the mRTM

Non-default route from the uRTM

Default route from the uRTM

Interface

The type of interface and the interface number.

Local Address

Indicates the IP address configured on the port or virtual interface.

Mode

Either DM for Dense Mode or SM for Sparse Mode.

Ver

The version of PIM Dense mode.

Designated Router

The IP address and port for the PIM designated device.

TTL Threshold

The minimum value required in a packet for it to be forwarded out of the
interface.

Multicast Boundary

The multicast boundary enabled (if any) for PIM interfaces.

VRF

If the PIM Dense instance is configured within a VRF, this field will
contain the name.

DR Prio

The priority of the designated device.

This field...

Displays...