Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) User Manual
Page 92
80
Multi-Service IronWare Multicast Configuration Guide
53-1003032-02
Configuring Multicast Source Discovery Protocol (MSDP)
1
Displaying Source Active cache information
To display the Source Actives in the MSDP cache, use the following command.
Syntax: show ip msdp sa-cache [ source-address | group-address | peer-as as-number | counts |
orig-rp rp-address | peer peer-address ] [rejected | self-originated]]
The source-address parameter selects the source address of the SA entry.
The group-address parameter selects the group address of the SA entry.
The peer-as keyword specifies the BGP AS Number of the forwarding peer.
The counts keyword displays only the count of entries.
The orig-rp keyword specifies the originating RP address.
The peer keyword specifies the peer address.
The rejected keyword displays the rejected SAs.
The self-originated keyword displays the self-originated SAs.
describes the output from this command.
You can use the following command to filter the output to display only the entries matching a
specific source.
Brocade#show ip msdp sa-cache 1.1.1.1
You can use the following command to filter the output to display only the entries matching a
specific group.
Brocade#show ip msdp sa-cache 239.1.1.1
TABLE 23
MSDP source active cache
This field...
Displays...
Total
The number of entries the cache currently contains.
Index
The cache entry number.
RP
The RP through which receivers can access the group traffic from the source
SourceAddr
The IP address of the multicast source.
GroupAddr
The IP multicast group to which the source is sending information.
Orig Peer
The peer from which this source-active entry was received.
Age
The number of seconds the entry has been in the cache
Brocade
# show ip msdp vrf blue sa-cache
Total of 10 SA cache entries
Index RP address (Source, Group) Orig Peer Age
1 2.2.2.2 (192.6.1.10, 227.1.1.1) 192.1.1.2 0
2 2.2.2.2 (192.6.1.10, 227.1.1.2) 192.1.1.2 0
3 2.2.2.2 (192.6.1.10, 227.1.1.3) 192.1.1.2 0
4 2.2.2.2 (192.6.1.10, 227.1.1.4) 192.1.1.2 0
5 2.2.2.2 (192.6.1.10, 227.1.1.5) 192.1.1.2 0
6 2.2.2.2 (192.6.1.10, 227.1.1.6) 192.1.1.2 0
7 2.2.2.2 (192.6.1.10, 227.1.1.7) 192.1.1.2 0
8 2.2.2.2 (192.6.1.10, 227.1.1.8) 192.1.1.2 0
9 2.2.2.2 (192.6.1.10, 227.1.1.9) 192.1.1.2 0
10 2.2.2.2 (192.6.1.10, 227.1.1.10) 192.1.1.2 0