Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 187)

Multi-Service IronWare Multicast Configuration Guide 175
53-1003032-02
IPv6 PIM Sparse
2
Displaying IPv6 PIM RPF
The show ipv6 pim rpf command displays what PIM sees as the reverse path to the source. While
there may be multiple routes back to the source, the one displayed by the show ipv6 pim rpf
command is the one that PIM thinks is best.
Syntax: show ipv6 pim [vrf vrf-name] rpf ip-address
The vrf parameter allows you to display what PIM sees as the reverse path to the source for a VRF
instance specified by the vrf-name variable.
The ip-address variable specifies the source address for RPF check.
Displaying IPv6 PIM counters
You can display the number of default-vlan-id changes that have occurred since the applicable VRF
was created and how many times a tagged port was placed in a VLAN since the applicable VRF was
created, as shown in the following example.
Syntax: show ipv6 pim [vrf vrf-name] counter
The vrf parameter allows you to display IPv6 PIM counters for the VRF instance identified by the
vrf-name variable.
Table 41 displays the output from the show ipv6 vrf eng counter command.
Displaying the IPv6 PIM resources
To display the hardware resource information, such as hardware allocation, availability, and limit for
software data structure, enter the show ipv6 pim resource command.
AvgRate Shows the average data traffic rate for the mcache entry
profile Shows the profile ID associated with the stream.
TABLE 41 Output from the show ipv6 pim vrf eng counter command
Field Description
DFTVlanChange The number of default-vlan-id changes that have occurred since the applicable
VRF was created.
VlanPort The number of times that a tagged port was placed in a VLAN since the
applicable VRF was created.
TABLE 40 Output parameters of the show ipv6 pim vrf mcache command (Continued)
Field Description
Brocade# show ipv6 pim vrf eng rpf 130.50.11.10
Source 130.50.11.10 directly connected on e4/1
Brocade(config)# show ipv6 pim vrf eng counter
Event Callback:
DFTVlanChange : 0 VlanPort : 2
LP to MP IPCs:
SM_REGISTER : 0 MCAST_CREATE : 31
S_G_AGEOUT : 4 WRONG_IF : 0
ABOVE_THRESHOLD : 0 MCAST_FIRST_DATA : 31