Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 202)

190 Multi-Service IronWare Multicast Configuration Guide
53-1003032-02
Multicast Listener Discovery and source-specific multicast protocols
2
Displaying static MLD groups
The following command displays static MLD groups for the “cs” VRF.
Syntax: show ipv6 mld [vrf vrf-name] static
The vrf parameter specifies that you want to display static MLD group information for the VRF
specified by the vrf-name variable.
Table 48 displays the output from the show ipv6 mld vrf cs static command.
Displaying MLD traffic
To display information on MLD traffic, enter a command such as the following.
The report has a Receive and a Send section.
Syntax: show ipv6 mld [vrf vrf-name] traffic
Last Member Query Interval Indicates when a leave is received; a group-specific query is sent. The last
member query count is the number of queries with a time interval of (LMQT)
is sent.
Last Member Query Count Specifies the number of group-specific queries when a leave is received.
TABLE 48 Output from the show ipv6 mld vrf cs static command
Field Description
Group Address The address of the multicast group.
Interface Port List The physical ports on which the multicast groups are received.
TABLE 47 Output from the show ipv6 mld vrf eng settings command (Continued)
Field Description
Brocade# show ipv6 mld vrf cs static
Group Address Interface Port List
----------------------------------------+---------+---------
ff1e:1::1 v3 ethe 2/10
ff1e:a::7f v3 ethe 2/10
Brocade# show ipv6 mld traffic
Recv QryV1 QryV2 G-Qry GSQry MbrV1 MbrV2 Leave IS_IN IS_EX 2_IN 2_EX ALLO BLK
e3/1 0 0 0 0 0 0 0 0 0 0 0 0 0
e3/2 0 0 0 0 0 0 0 0 0 0 0 0 0
e6/18 0 0 0 0 0 176 0 110 0 0 0 66 0
e6/19 0 0 0 0 0 176 0 110 0 0 0 66 0
e6/20 0 0 0 0 0 176 0 110 0 0 0 66 0
e6/25 0 0 0 0 0 176 0 110 0 0 0 66 0
l1 0 0 0 0 0 0 0 0 0 0 0 0 0
Send QryV1 QryV2 G-Qry GSQry
e3/1 0 0 0 0
e3/2 0 0 0 0
e6/18 0 10 10 0
e6/19 0 10 10 0
e6/20 0 10 10 0
e6/25 0 10 10 0
l1 0 0 0 0
R2#