Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 151)

Multi-Service IronWare Multicast Configuration Guide 139
53-1003032-02
IP multicast traffic reduction
1
Displaying IP multicast information
The following sections show how to display and clear IP multicast reduction information.
Displaying multicast information
You can display IP multicast traffic introduction in a brief mode for all instances or in a detail mode
for a specified VLAN or VPLS instance.
Brocade# show ip multicast vlan 18
----+-----+---------+---------------+-----+-----+------
VLAN State Mode Active Time (*, G)(S, G)
Querier Query Count Count
----+-----+---------+---------------+-----+-----+------
18 Ena Active Self 96 3 2
----+-----+---------+---------------+-----+-----+------
Router ports:
Flags: R-Router Port, V2|V3: IGMP Receiver, P_G|P_SG: PIM Join
1 (*, 229.15.15.1 ) 00:19:15 NumOIF: 3 profile: 31
Outgoing Interfaces:
e3/3 vlan 18 ( V2) 00:17:28/22s
e1/9 vlan 18 ( V2) 00:19:09/21s
e1/24 vlan 18 ( V2) 00:19:09/23s
1 (18.0.0.2, 229.15.15.1) in e1/11 vlan 18 00:19:15 NumOIF: 3 profile: 31
Outgoing Interfaces:
e3/3 vlan 18 ( V2) 00:17:28/0s
TR(e1/9,e1/1) vlan 18 ( V2) 00:19:09/0s
e1/24 vlan 18 ( V2) 00:19:09/0s
FID: 0x80a8 MVID: None
2 (*, 229.15.15.7 ) 00:19:16 NumOIF: 3 profile: 31
Outgoing Interfaces:
e3/3 vlan 18 ( V2) 00:17:29/23s
e1/9 vlan 18 ( V2) 00:19:10/22s
e1/24 vlan 18 ( V2) 00:19:10/24s
1 (18.0.0.2, 229.15.15.7) in e1/11 vlan 18 00:19:16 NumOIF: 3 profile: 31
Outgoing Interfaces:
e3/3 vlan 18 ( V2) 00:17:29/0s
TR(e1/9,e1/1) vlan 18 ( V2) 00:19:10/0s
e1/24 vlan 18 ( V2) 00:19:10/0s
FID: 0x8082 MVID: None
3 (*, 229.15.15.3 ) 00:19:16 NumOIF: 3 profile: 31
Outgoing Interfaces:
e3/3 vlan 18 ( V2) 00:17:29/23s
e1/9 vlan 18 ( V2) 00:19:10/22s
e1/24 vlan 18 ( V2) 00:19:10/24s
Syntax: show ip multicast vlan vlan-id
The vlan vlan-id parameter displays IP multicast VLAN information for a specified VLAN.
Table 29 describes the output parameters of the show ip multicast vlan 18 command.