Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 115)

Multi-Service IronWare Multicast Configuration Guide 103
53-1003032-02
Configuring DVMRP
1
Syntax: show ip dvmrp [vrf vrf-name] resource
The vrf option allows you to display available multicast resources for the VRF instance identified by
the vrf-name variable.
Displaying IP multicast route Information
To display IP multicast route information, enter the following command.
Brocade# show ip dvmrp route
P:Parent M:Metric
Total Routes=10
SourceNet Mask Gateway P M
100.1.1.0 255.255.255.0 172.5.1.2 e5/2 2
Int e5/2 phy_p e5/2 nbr 172.5.1.2 age=0 NOT downstream
101.1.1.0 255.255.255.0 172.5.1.2 e5/2 2
Int e5/2 phy_p e5/2 nbr 172.5.1.2 age=0 NOT downstream
102.1.1.0 255.255.255.0 172.5.1.2 e5/2 2
Int e5/2 phy_p e5/2 nbr 172.5.1.2 age=0 NOT downstream
103.1.1.0 255.255.255.0 172.5.1.2 e5/2 2
Int e5/2 phy_p e5/2 nbr 172.5.1.2 age=0 NOT downstream
Syntax: show ip dvmrp [vrf vrf-name] route
The vrf option allows you to display multicast route information for the VRF instance identified by
the vrf-name variable.
The display shows the following information.
Displaying active multicast traffic information
To display active multicast traffic information, enter the following command.
Brocade# show ip dvmrp traffic
Port Probe Graft Prune
[Rx Tx Dscrd] [Rx Tx Dscrd] [Rx Tx Dscrd]
e5/2 111 112 0 0 0 0 9 0 1
e8/1 0 220 0 0 0 0 0 0 0
v10 0 211 0 0 0 0 0 0 0
v20 0 210 0 0 0 0 0 0 0
Total 111 1718 0 0 0 0 9 0 1
IGMP Statistics:
Total Discard/chksum 0/0
Syntax: show ip dvmrp [vrf vrf-name] traffic
This field... Displays...
Total Routes The number of entries in the DVMRP routing table.
SourceNet The IP address of the source network for the route.
Mask The subnet mask for the router.
Gateway The IP address of the gateway for the route.
P The parent port.
M The metric which is the distance in hops to the source subnet.