Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 182)

170 Multi-Service IronWare Multicast Configuration Guide
53-1003032-02
IPv6 PIM Sparse
2
Table 35 displays the output from the show ipv6 pim rp-candidate command.
Displaying RP-to-group mappings
To display RP-to-group-mappings, enter the show ipv6 pim rp-map command at any CLI level.
Syntax: show ipv6 pim [vrf vrf-name] rp-map
The vrf parameter allows you to display IPv6 RP-to-group-mappings for the VRF instance identified
by the vrf-name variable.
Table 36 displays the output from the show ipv6 rp-map command.
Displaying RP information for an IPv6 PIM Sparse group
To display RP information for an IPv6 PIM Sparse group, enter the following command at any CLI
level.
Syntax: show ipv6 pim [vrf vrf-name] rp-hash group-addr
TABLE 35 Output from the show ipv6 pim rp-candidate command
Field Description
Candidate-RP-advertisement in Indicates how many seconds will pass before the BSR sends its next RP
message.
NOTE: This field appears only if this device is a candidate RP.
RP Indicates the IPv6 address of the Rendezvous Point (RP).
NOTE: This field appears only if this device is a candidate RP.
group prefixes Indicates the multicast groups for which the RP listed by the previous field
is a candidate RP.
NOTE: This field appears only if this device is a candidate RP.
Candidate-RP-advertisement period Indicates how frequently the BSR sends candidate RP advertisement
messages.
NOTE: This field appears only if this device is a candidate RP.
TABLE 36 Output from the show ipv6 pim rp-map command
Field Description
Index The index number of the table entry in the display.
Group address Indicates the IPv6 PIM Sparse multicast group address using the listed RP.
RP address Indicates the Iv6 address of the Rendezvous Point (RP) for the listed PIM
Sparse group.
Brocade# show ipv6 pim rp-map
Idx Group address RP address
1ff1e::1:2 2001:3e8:255:255::17
2 ff7e:a40:2001:3e8:27:0:1:2 2001:3e8:27::a
3 ff7e:140:2001:3e8:16:0:1:2 2001:3e8:16::1
Brocade# show ipv6 pim rp-hash ff1e::1:2
RP: 2001:3e8:255:255::17, v2
Info source: 2001:3e8:255:255::17, via bootstrap