Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 155)

Multi-Service IronWare Multicast Configuration Guide 143
53-1003032-02
IP multicast traffic reduction
1
Group Specific Queries Received: 2
Others Received: 0
General Queries Sent: 0
Group Specific Queries Sent: 0
The command in this example shows the statistics for VLAN 1.
Syntax: show ip multicast vlan vlan-id statistics
Clearing IP multicast statistics
To clear IP multicast statistics on a device, enter the following command at the Privileged EXEC
level of the CLI.
Brocade# clear ip multicast statistics
This command resets statistics counters for all the VLANs to zero.
Syntax: clear ip multicast statistics
Clearing IGMP group flows
To clear all the IGMP flows learned by the device, enter the following command at the Privileged
EXEC level of the CLI.
Brocade# clear ip multicast all
The following example shows IGMP flows information listed by the show ip multicast command,
followed by removal of the information by the clear ip multicast all command.
To clear the learned IGMP flows for a specific IP multicast group, enter a command such as the
following.
Brocade# clear ip multicast vlan 1 group 239.255.162.5
Brocade# show ip multicast
IP multicast is enabled - Active
VLAN ID 1
Active 192.168.2.30 Router Ports 4/13
Multicast Group: 239.255.162.5, Port: 4/4 4/13
Multicast Group: 239.255.162.4, Port: 4/10 4/13
Brocade# clear ip multicast all
Brocade# show ip multicast
IP multicast is enabled - Active
VLAN ID 1
Active 192.168.2.30 Router Ports 4/13