Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 201)

Multi-Service IronWare Multicast Configuration Guide 189
53-1003032-02
Multicast Listener Discovery and source-specific multicast protocols
2
Displaying MLD settings
To display MLD settings for the “eng” VRF, enter the following command.
Syntax: show ipv6 mld [vrf vrf-name] settings
The vrf parameter specifies that you want to display information for MLD settings for the VRF
specified by the vrf-name variable.
Table 47 displays the output from the show ipv6 mld vrf eng settings command.
TABLE 47 Output from the show ipv6 mld vrf eng settings command
Field Description
Query Interval How often the router will query an interface for group membership.
Configured Interval The interval that has been configured for the router.
Max Response Time The length of time in seconds that the router will wait for an IGMP (V1 or V2)
response from an interface before concluding that the group member on
that interface is down and removing it from the group.
Group Membership Time The length of time in seconds that a group will remain active on an interface
in the absence of a group report.
Operating Version The IGMP version operating on the router.
Configured Version The IGMP version configured on the router.
Robustness Variable Used to fine-tune for unexpected loss on the subnet. The value is used to
calculate the group interval.
Brocade(config)# show ipv mld vrf public interface
---------+------+---------+---------------------------------------+---------+---
--+---------
Intf/Port|Groups| Version |Querier | Timer
|V1Rtr|Tracking
| | Oper Cfg| | OQrr GenQ|
|
---------+------+----+----+---------------------------------------+----+----+---
--+---------
v6 0 2 -
Disabled
e5/1 2 - fe80::20c:dbff:fee2:5000 11 0 No
v61 0 2 -
Disabled
e11/1 2 - Self 0 122 No
Brocade# show ipv6 mld vrf eng settings
MLD Global Configuration
Query Interval : 125s Configured Interval : 125s
Max Response Time : 10s
Group Membership Time : 260s
Operating Version : 2 Configured Version : 0
Robustness Variable : 2
Last Member Query Interval: 1s Last Member Query Count: 2
Older Host Present Timer : 260s