Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) - Manual (Page 111)

Multi-Service IronWare Multicast Configuration Guide 99
53-1003032-02
Configuring DVMRP
1
Interface e8/1
TTL Threshold: 1, Enabled, Querier
Local Address: 172.8.1.1
DR: itself
Interface v10
TTL Threshold: 1, Enabled, Querier
Local Address: 192.1.1.1 logical Vid=1
DR: itself
Interface v20
TTL Threshold: 1, Enabled, Querier
Local Address: 192.2.1.1 logical Vid=2
DR: itself
Interface v30
TTL Threshold: 1, Enabled, Querier
Local Address: 192.3.1.1 logical Vid=3
DR: itself
Interface v40
TTL Threshold: 1, Enabled, Querier
Local Address: 192.4.1.1 logical Vid=4
DR: itself
Syntax: show ip dvmrp [vrf vrf-name] interface
The vrf option allows you to display DVMRP interface information for the VRF instance identified by
the vrf-name variable.
The display shows the following information
Displaying DVMRP multicast cache information
To display DVMRP Multicast Cache information, enter the following command.
Brocade# show ip dvmrp mcache 30.30.30.104 239.10.10.4
IP Multicast Mcache Table
Interface Flags: IM - Immediate, IH - Inherited
MJ - Membership Join, MI - Membership Include, ME - Membership
Exclude
BR - Blocked RPT, BA - Blocked Assert, BF - Blocked Filter, BI -
Blocked IIF
1 (30.30.30.104, 239.10.10.4) in v30 (tag e3/10), Uptime 00:06:24 (DVMRP)
Flags (0x30000061) HW FAST
TABLE 25
This field... Displays...
Interface The type of interface and the interface number. The interface can be one
of the following:
•
Ethernet
•
VE
The number is either a port and slot number or the virtual interface (VE)
number.
TTL Threshold Following the TTL threshold value, the interface state is listed. The
interface state can be one of the following:
•
Disabled
•
Enabled
Local Address Indicates the IP address configured on the port or virtual interface
DR Designated router.