beautypg.com

Displaying bsr information – Brocade Multi-Service IronWare Multicast Configuration Guide (Supporting R05.6.00) User Manual

Page 180

background image

168

Multi-Service IronWare Multicast Configuration Guide

53-1003032-02

IPv6 PIM Sparse

2

Syntax: show ipv6 pim [vrf vrf-name] group

The vrf parameter allows you to display IPv6 PIM group information for the VRF instance identified
by the vrf-name variable.

Table 33

displays the output from the show ipv6 pim group command.

Displaying BSR information

To display information on a device that has been elected as the BSR, enter the show ipv6 pim bsr
command at the CLI level.

The following example shows information displayed on a device that is not the BSR. Notice that
some fields shown in the previous example do not appear in the following example.

Syntax: show ipv6 pim [vrf vrf-name] bsr

The vrf parameter allows you to display IPv6 PIM BSR information for the VRF instance identified by
the vrf-name variable.

Table 34

displays the output from the show ipv6 pim bsr command.

TABLE 33

Output from the show ipv6 pim group command

Field

Description

Total number of Groups

Lists the total number of IPv6 multicast groups the device is forwarding.

Group

The multicast group address.

Ports

The device ports connected to the receivers of the groups.

Brocade# show ipv6 pim group

Total number of groups: 1

1 Group ff7e:a40:2001:3e8:27:0:1:2 Ports

Group member at e3/1: v31

Brocade# show ipv6 pim bsr

PIMv2 Bootstrap information

This system is the elected Bootstrap Router (BSR)

BSR address: 2001:3e8:255:255::17

Uptime: 00:12:09, BSR priority: 0, Hash mask length: 126

Next bootstrap message in 00:00:30

Next Candidate-RP-advertisment in 00:00:30

RP: 2001:3e8:255:255::17

group prefixes:

ff00:: / 8

Candidate-RP-advertisement period: 60

Brocade# show ipv6 pim bsr

PIMv2 Bootstrap information

BSR address = 2001:3e8:255:255::17

BSR priority = 0