Yokogawa PC-Based MX100 - Manual (Page 996)

19-2
IM MX190-01E
19.2 Correspondence between the Functions and
Class/Member Functions - DARWIN -
This section indicates functions and classes that this extension API supports.
Note
This extension API provides a portion of the functions common to the DARWIN series
instruments. Model-specific functions, setup functions of the setup mode, and A/D
calibration functions are not given. The functions can be added by using the
commands of the DARWIN communication function.
The word “command” in the table signifies the command of the DARWIN
communication function. For the details on the command, see the Communication
Interface User’s Manual.
There are two types of functions, status transition functions and retrieval functions.
Status transition functions control DARWIN.
With retrieval functions, the parameter values of the current status are retrieved.
When using retrieval functions, the data value of the stored current status is
returned (the status of the extension API does not change).
Status Transition Functions
Communication Functions
Function Command Class and Member Function
Communication connection - CDAQDA100:: open
Comm. cut - CDAQDA100:: close
Send in units of lines - CDAQDA100:: sendLine
Receive in units of lines - CDAQDA100:: receiveLine
Receive in units of bytes - CDAQDA100:: receiveByte
Send trigger (ESC T) CDAQDA100:: sendTrigger
Update status (ESC S) CDAQDA100:: updateStatus
Execute command - CDAQDA100:: runCommand
Except during connection or status updates, communciation functions do not
perform status updates of stored data.