Yokogawa PC-Based MX100 - Manual (Page 1026)

19-32
IM MX190-01E
CDAQDA100::setChRRJC
Syntax
int setChRRJC(int chType, int chNo, int refChNo, int spanMin =
0, int spanMax = 0);
Parameters
chType pecify the channel type.
chNo Specify the channel number.
refChNo Specify the channel number of the reference channel.
spanMin Specify the left value of the span.
spanMax Specify the right value of the span.
Description
Sets the remote RJC for the specified reference channel.
If the left and right values are the same, the span designation is considered omitted.
If the channel type is set to the constant for “Specify all measurement channel
types,” all subunits are processed.
If the channel number is set to the constant for “Specify all channel numbers,” all
channels within the channel type are processed.
Updates the status if successful.
Return value
Returns an error number.
Reference
chNumMax getClassSysInfo measInfoCh setRRJC
CDAQDARWINSysInfo::isExist
19.6 Details of the DARWIN Class