Yokogawa PC-Based MX100 - Manual (Page 1231)

App-10
IM MX190-01E
Reference Channel Number
The channel used as a reference for difference computations with AI/DI channels or
for remote RJC with AI channels.
It is the channel number of the transmission source for transmission output with AO/
PWM channels.
Response
For every request command there is a corresponding reply. For every request
command there is a corresponding reply. The response is either of the following.
• Processing was carried out normally.
• Processing was not carried out normally.
If processing is not carried out normally or execution fails, the function returns an
error number. Detailed error numbers are shown in “MX-Specific Errors.” You can
retrieve them separately.
RJC Voltage
Compensation voltage when using the external RJC function.
It is an integer with units mV.
Status Data
System (unit) status.
See the MXStatus structure.
It includes the following status information.
• Unit status value
• CF status information
• FIFO status information
Setup Item Numbers
These numbers are added to each item of the setup data structure to unify them.
When sending the setup data, the numbers show the detected location when an
error occurs during a consistency check.
A definition file is available. See section 6.3, “MX100 Setup Item Numbers.”
Appendix 1 MX100 Terminology