Yokogawa PC-Based MX100 - Manual (Page 166)

2-143
IM MX190-01E
MX100 -Visual C++
2
CDAQMXConfig::setDELTA
Syntax
void setDELTA(int chNo, int refChNo, int spanMin = 0, int
spanMax = 0, int iRange = DAQMX_RANGE_REFERENCE);
Parameters
chNo Specify the channel number.
refChNo Specify the reference channel number.
spanMin Specify the span minimum.
spanMax Specify the span maximum.
iRange Specify the range type.
Description
Sets the channel of the specified channel number to the specified range.
If the maximum and minimum values are the same, the span is considered omitted.
If the channel does not exist or the channel is not on the corresponding module, the
setting is void. If the range type is set to “Reference Channel” the range of the
channel specified by the reference channel number is applied. If the constant for
“Specify all channel numbers” is specified for the channel numbers, all channels are
processed. If the range type is strain, the initial balancing data is reset.
Channels which have the same channel number as the reference channel number
cannot be processed (R3.01 or later).
Reference
getClassMXBalanceData getClassMXChConfig getClassMXSysInfo
CDAQMXBalanceData::setBalance CDAQMXChConfig::getRange
CDAQMXChConfig::isValid CDAQMXChConfig::setDELTA
CDAQMXChConfig::setSpan CDAQMXSysInfo::getModuleType
CDAQMXSysInfo::getTempUnit
2.5 Details of the MX100 Class