Yokogawa PC-Based MX100 - Manual (Page 126)

2-103
IM MX190-01E
MX100 -Visual C++
2
CDAQMXChConfig::setRES
Syntax
void setRES(int iRangeRES);
Parameters
iRangeRES Specify the range type of the resistance range.
Description
Sets the specified range.
Makes the channel status valid.
The settings are set to the default values of the specified range type.
The channel type is set to AI.
Any specification other than the resistance range is ignored.
The span, scale, decimal point position, unit name, and reference channel are set to
the default values.
The alarm setting is initialized (cleared).
Reference
setAlarm setPoint setRefChNo setScalling setSpan setType
setUnit setValid
CDAQMXChConfig::setRJCType
Syntax
void setRJCType(int iRJCType, int volt = 0);
Parameters
iRJCType Specify the RJC type.
volt Specify the RJC voltage.
Description
Stores the specified value in the AI setup data field of the data member.
2.5 Details of the MX100 Class