Yokogawa PC-Based MX100 - Manual (Page 61)

2-38
IM MX190-01E
Setup Functions
Collective Setup
setConfig
Sets the setup data.
setMXConfig Sets the basic settings.
setOutput Sets the basic setting output channel data.
setBalance Sets initial balance data.
runBalance Executes initial balancing.
resetBalance Initializes the initial balance value.
Data Retrieval Functions
Retrieval of System Status Data and System Configuration Data
getStatusData Gets the status.
getSystemConfig Gets the system configuration data.
Retrieval of Setup Data
getConfig
Gets the setup data.
talkConfig Declares the retrieval of the setup data.
getChConfig Gets the channel setup data.
getMXConfig Gets the basic settings.
getOutput Gets the basic output channel data.
getBalance Gets initial balance data.
Retrieval of Output Data
getDOData Gets the DO data.
getAOPWMData Gets AO/PWM data and transmission output data.
Retrieval of Channel Information Data
talkChInfo
Declares the retrieval of the channel information data.
getChInfo Gets the channel information data.
Retrieval of the Measured Data
getChDataNo Gets the data number of the channel.
talkChData Declares the retrieval of the measured data according to the
channel specification.
getTimeData Gets the time information data of the measured data.
getFIFODataNo Gets the data number of the FIFO.
talkFIFOData Declares the retrieval of the measured data according to the
FIFO specification.
getChData Gets the measured data.
getTimeData Gets the time information data of the measured data.
Utilities
getUserTime Gets the user count.
setUserTime Sets the user count.
getLastError Gets the MX100-specific error.
getItemError Gets the setting item number.
2.5 Details of the MX100 Class