Yokogawa PC-Based MX100 - Manual (Page 581)

12-17
IM MX190-01E
MX100 for Extended API
12
Retrieval of Measured Values
value = ((daqmx100.getClassMXDataBuffer(1))->
currentDataInfo())->getValue();
Retrieves the measured value of the current status of channel 1 from the field where
the measured data by channels are stored through the measured data of the current
status.
FIFO Stop
rc = daqmx100.measStop();
Stops the FIFO.
Comm. cut
rc = daqmx100.close();
Drops the connection.
Reference
The sample program is completed by executing measDaraCh only once.
Each time the measDataCh is executed, the measurement point advances by one,
and the next data is set as the current status. When the last stored measurement
point is reached, the next retrievable amount of data is retrieved again.
12.3 Programming - MX100/Visual C++ -