Yokogawa PC-Based MX100 - Manual (Page 587)

12-23
IM MX190-01E
MX100 for Exteded API
12
Utilities
initDataCh Initializes the stored data of the specified channel.
initDataFIFO Initializes the stored data of the specified FIFO.
getDataNum Gets the remaining number of data.
toChNo Gets the channel number.
• Overridden Members
Communication Functions
open Establishes connection.
Control Functions
setDateTime Sets the time information.
formatCF Formats the CF card.
Utilities
isObject Checks an object.
• Inherited Members
See CDAQHandler.
closeget getErrorMessage getMaxLenErrorMessage getRevisionAPI
getVersionAPI receiveLine sendLine setTimeOut
See CDAQMX
autoFIFO getAOPWMData getBalance getChannel getChConfig
getChData getChDataNo getChInfo getConfig getData getDOData
getFIFOData getFIFODataNo getItemError getLastError
getMXConfig getOutput getStatusData getUserTime getTimeData
initSystem resetBalance runBalance setAOPWMData setBackup
setBalance setConfig setDOData setMXConfig setOutput
setSegment setTransmit setUserTime startFIFO stopFIFO
talkChData talkChInfo talkConfig
Protected Members
Data Members
m_cMXItemConfig Field for storing the setup data.
m_cMXDataBuffer Field for storing various types of information on
each measurement channel.
m_cMXDOList Field for managing the DO data.
m_cMXAOPWMList Field for managing the AO/PWM data.
m_cMXTransmitList Field for managing the transmission output data.
m_cMXBalanceList Field for managing the initial balance data.
12.4 Details of the MX100 Class