Yokogawa PC-Based MX100 - Manual (Page 174)

2-151
IM MX190-01E
MX100 -Visual C++
2
CDAQMXConfig::setTC
Syntax
void setTC(int chNo, int iRangeTC, int spanMin = 0, int
spanMax = 0);
Parameters
chNo Specify the channel number.
iRangeTC Specify the range type of the thermocouple input.
spanMin Specify the span minimum.
spanMax Specify the span maximum.
Description
Sets the channel of the specified channel number to the specified range.
If the maximum and minimum values are the same, the span is considered omitted.
If the channel does not exist or the channel is not on the corresponding module, the
setting is void.
If the constant for “Specify all channel numbers” is specified for the channel
numbers, all channels are processed.
Reference
getClassMXChConfig getClassMXSysInfo CDAQMXChConfig::setSpan
CDAQMXChConfig::setTC CDAQMXSysInfo::getModuleType
CDAQMXSysInfo::getTempUnit
CDAQMXConfig::setTempUnit
Syntax
void setTempUnit(int iTempUnit);
Parameters
iTempUnit Specify the temperature unit type.
Description
Changes the temperature unit type of the setup data.
Stores the specified value in the System configuration data field.
Changes the settings of the channels affected.
Reference
CDAQMXChConfigData::changeRange
CDAQMXSysInfo::setTempUnit
2.5 Details of the MX100 Class