Yokogawa PC-Based MX100 - Manual (Page 688)

14-2
IM MX190-01E
Control Functions
Function FIFO Function
Set date/time Current time Stop setDateTimeNowMX100
Set backup valid/invalid Continue switchBackupMX100
Format of the CF card. Stop formatCFMX100
Unit Reconfigure Stop reconstructMX100
Initialize Stop initSetValueMX100
Reset alarm Stop ackAlarmMX100
(alarm ACK)
7-segment LED display Continue displaySegmentMX100
Initialize stored data Specify channel Continue initDataChMX100
Specify FIFO Continue initDataFIFOMX100
At the end of communications, the control function updates the status.
See the data manipulation functions for more about the data transmission and setup
functions. Time cannot be set arbitrarily.
Setup Functions
Function FIFO Function
Set setup data All setup data Stop sendConfigMX100
(send collectively) Basic setup data Stop sendConfigMX100
Set setup data System configuration data Stop sendConfigMX100
individually Channel setup data Stop sendConfigMX100
Initial balance data Stop sendConfigMX100
Output channel data Stop sendConfigMX100
Initial balance data Execute Stop initBalanceMX100
Reset Stop clearBalanceMX100
The setup data setting function sends the data being stored.
When setting arbitrary initial balance data, see the initial balance data sending
function under data manipulation functions.
14.1 Functions and Their Functionalities - MX100/Visual Basic -