Yokogawa PC-Based MX100 - Manual (Page 331)

5-73
IM MX190-01E
Functions for the MX100 (Visual C/Visual Basic)
5
setSKIPMX
Syntax
int setSKIPMX(DAQMX daqmx, int startChNo, int endChNo);
Declaration
Public Declare Function setSKIPMX Lib "DAQMX"(ByVal daqmx As
Long, ByVal startChNo As Long, ByVal endChNo As Long) As Long
Parameters
daqmx Specify the device descriptor.
startChNo Specify the start channel number.
endChNo Specify the end channel number.
Description
Sets the specified channel range to SKIP (not used).
• The setup data is retrieved collectively, changed, and sent collectively.
• When set to an unused channel, the channel settings on the main unit are lost.
Return value
Returns an error number.
Error:
Not descriptor
No device descriptor.
Reference
CDAQMX::getMXConfig
CDAQMX::setMXConfig
CDAQMXConfig::setSKIP
5.1 Details of Functions - MX100 (Visual C/Visual Basic) -