Yokogawa PC-Based MX100 - Manual (Page 401)

7-3
IM MX190-01E
DARWIN - Visual C++ -
7
Control Functions
Function Command Class and Member Function
Switch the setting mode. DS CDAQDARWIN::transMode
System reconfiguration RS CDAQDARWIN::initSystem
RAM clear (Initialize the operation mode RC
setup parameter.)
Alarm reset AR
Date/Time setting SD CDAQDARWIN::setDateTime
Calculation start/stop EX CDAQDARWIN::compute
Report start/stop DR CDAQDARWIN::reporting
Finalize setup mode XE CDAQDARWIN::establish
Setup Functions
Function Command Class and Member Function
Range Settings
SKIP (not used) SR CDAQDARWIN::setSKIP
DC voltage input SR CDAQDARWIN::setVOLT
Thermocouple input SR CDAQDARWIN::setTC
RTD input SR CDAQDARWIN::setRTD
Contact input (DI) SR CDAQDARWIN::setDI
Difference computation between channels SR CDAQDARWIN::setDELTA
Remote RJC SR CDAQDARWIN::setRRJC
DC current SR CDAQDARWIN::setMA
Strain SR CDAQDARWIN::setSTRAIN
Pulse SR CDAQDARWIN::setPULSE
Power monitor SR CDAQDARWIN::setPOWER
Set the scale unit SN CDAQDARWIN::setScallingUnit
Set the alarm SA CDAQDARWIN::setAlarm
Data Retrieval Functions
Function Command Class and Member Function
Get system configuration data. TS, CF DAQDARWIN::getSystemConfig
Declare the retrieval of the TS, LF CDAQDARWIN::talkChInfo
channel information data.
Get channel information data. CDAQDARWIN::getChInfo
Declare the retrieval of the TS, FM CDAQDARWIN::talkDataByASCII
measured data (ASCII code).
Get the measured data (ASCII code). CDAQDARWIN::getChDataByASCII
Declare the retrieval of the measured TS, FM CDAQDARWIN::talkDataByBinary
data (binary code).
Get the measured data (binary code). CDAQDARWIN::getChDataByBinary
Declare the retrieval of the setup TS, LF CDAQDARWIN::talkOperationData
data (operation mode).
7.2 Correspondence between the Functions and Class/Member Functions - DARWIN -