Yokogawa PC-Based MX100 - Manual (Page 369)

6-8
IM MX190-01E
Unit Type Logic
Can be synthesized using OR computations
Mnemonic Description
DAQMX_UNITTYPE_NONE Unknown
DAQMX_UNITTYPE_MX100 MX100
Terminal Types
Mnemonic Description
DAQMX_TERMINAL_SCREW Screw terminal
DAQMX_TERMINAL_CLAMP Clamp terminal
DAQMX_TERMINAL_NDIS NDIS
DAQMX_TERMINAL_DSUB D-SUB 9-pin connector
A/D Integration Time Type
Mnemonic Description
DAQMX_INTEGRAL_AUTO Auto (MX100 automatically sets 50 or 60 Hz)
DAQMX_INTEGRAL_50HZ 50 Hz
DAQMX_INTEGRAL_60HZ 60 Hz
Temperature Unit Types
Mnemonic Description
DAQMX_TEMPUNIT_C °C
DAQMX_TEMPUNIT_F °F
CF Write Modes
Mnemonic Description
DAQMX_CFWRITEMODE_ONCE No overwriting (stops writing when there is no
more free space)
DAQMX_CFWRITEMODE_FIFO Repeat (overwrite from the oldest data)
CF Status Types
Can be synthesized using logical OR computations
Mnemonic Description
DAQMX_CFSTATUS_NONE All OFF
DAQMX_CFSTATUS_EXIST Presence or absence
DAQMX_CFSTATUS_USE CF card is usable.
DAQMX_CFSTATUS_FORMAT CF card is being formatted.
Unit Status Values
Mnemonic Description
DAQMX_UNITSTAT_NONE Unknown
DAQMX_UNITSTAT_INIT Initializing
DAQMX_UNITSTAT_STOP Stopped
DAQMX_UNITSTAT_RUN Measuring
DAQMX_UNITSTAT_BACKUP Measuring (backing up)
6.2 MX100 Constants