Yokogawa PC-Based MX100 - Manual (Page 381)

6-20
IM MX190-01E
Mnemonic Value Location Description Error String
DAQMX_ITEM_CHIDLECHOICE 1920 aOutputData. Value selected when Value Channel00
aOutput[ ]. idle is out of range. Idle
aIdleChoice Choice
DAQMX_ITEM_CHERRCHOICE 1984 aOutputData. Value selected during Value Channel00
aOutput[ ]. error is out of range. Error Choice
aErrorChoice
DAQMX_ITEM_CHPRESETVALUE 2048 aOutputData. Value when the Value Channel00
aOutput[ ]. selection value is the is out of range. Preset Value
aPresetValue specified value.
DAQMX_ITEM_CHPULSETIME 2112 aOutputData. Pulse interval integer Value Channel00
aOutput[ ]. multiple is out of range. Pulse Time
aPulseTime
DAQMX_ITEM_CHBALANCEVALID 2176 aBalanceData. Valid/invalid - Channel00
aBalance[ ]. aValid Balance Valid
DAQMX_ITEM_CHBALANCEVALUE 2240 aBalanceData. Initial balance value Value Channel00
aBalance[ ]. aValue is out of range. Balance Value
DAQMX_ITEM_CHCHATFILTER 2368 aChConfigData. Chattering filter - Channel00
aChConfig[ ]. ChatFilter
aAIDI.aChatFilter
DAQMX_ITEM_ALARMTYPE2 2432 aChConfigData. Alarm type of alarm Value Channel00
aChConfig[ ]. level 3 or 4. Type is out of range. Alarm0 Type
aChID.aAlarm[ ].
aType
DAQMX_ITEM_ALARMON2 2560 aChConfigData. On value of alarm Value Channel00
aChConfig[ ]. level 3 or 4. is out of range. Alarm0 On
aChID.aAlarm[ ].
aON
DAQMX_ITEM_ALARMOFF2 2688 aChConfigData. Off value of alarm Value Channel00
aChConfig[ ]. level 3 or 4. is out of range. Alarm0 Off
aChID.aAlarm[ ].
aOFF
DAQMX_ITEM_CHREFALARM2 2816 aChConfigData. The alarm - Channel00
aChConfig[ ]. level 3 or 4 of all Alarm0
aDO. reference channels. Reference
aRefAlarm[*][ ] Expresses multiple
reference channels
together.
The relationship between the maximum and minimum values of span and scale are
checked, so the value that expresses the minimum value is set as the detected
position.
In the string Channel00, the channel number is included. The 0 in the string Alarm0
is the alarm level number.
The actual values are the values in the table with the channel number (index)
added.
In the case of alarms, the alarm level number (index) is also added to the 7th bit to
the left. It is the value in which the channel number (index) is added to the values in
the table below.
6.3 MX100 Setting Item Numbers