Yokogawa PC-Based MX100 - Manual (Page 238)

3-3
IM MX190-01E
MX100 - Visual C
3
Function FIFO Function
Set the channel tag. Stop setTagMX
Set a comment for the channel. Stop setCommentMX
Set the alarm. Stop setAlarmMX
Set the RJC used on the channel. Stop setRJCTypeMX
Set the filter. Stop setFilterMX
Set the burnout detection action. Stop setBurnoutMX
Set the alarm to be assigned to the DO channel Stop setRefAlarmMX
(To set a DO channel to alarm output, use the setDOTypeMX function.)
Set the scan interval. Stop setIntervalMX
Set the temperature unit. Stop setTempUnitMX
Set the ID number of the unit. Stop setUnitNoMX
Set the timeout value (the time from the disconnection to Stop setSystemTimeoutMX
the start of saving to the CF card). For the calculation
method of the timeout value, see appendix 3.
Set the signal type to be assigned to the DO channel. Stop setDOTypeMX
Set the AO channel type. Stop setAOTypeMX
Set the PWM channel type. Stop setPWMTypeMX
Output channel data Output types Stop setOutputTypeMX
Selected value Stop setChoiceMX
Pulse interval integer multiple Stop setPulseTimeMX
Change a portion of the DO data. Continue changeDODataMX
Change a portion of the AO/PWM data Continue
changeAOPWMDataMX
Change a portion of the initial balance data Continue changeBalanceMX
Change a portion of the transmission output data Continue changeTransmitMX
Sets the chattering filter on the channel. Stop setChatFilterMX
For a description of the FIFO column in the table, see the explanation given in
“Other Controls” on the previous page. If an invalid data error occurs, the last
detected item is saved as a setting item number. It can be retrieved with a utility.
Data Retrieval Functions
Retrieval of System Status Data and System Configuration Data
Function Function
Get system status data. getStatusDataMX
Get system configuration data. getSystemConfigMX
3.1 Functions and Their Functionalities - MX100/Visual C -