Yokogawa PC-Based MX100 - Manual (Page 458)

7-60
IM MX190-01E
CDAQDARWINDataInfo::setLine
Syntax
int setLine(const char * strLine, int lenLine, int * pFlag);
Parameters
strLine Specify the line using a string.
lenLine Specify the byte size of the line.
pFlag Specify the destination where the flag is to be returned.
Description
Analyzes the specified line and stores the information in the data member.
The line format is the output format of the measured data in ASCII code.
If an association with the channel information data exists, the information that can
be retrieved from the specified line is stored in the channel information data field.
Return value
Returns an error number.
Error:
Not data The input data is too short. Or, the string incorrect.
Reference
getClassDARWINChInfo getStatus setAlarm setStatus setValue
toAlarmType CDAQDARWINChInfo::setChNo
CDAQDARWINChInfo::setChType CDAQDARWINChInfo::setPoint
CDAQDARWINChInfo::setUnit CDAQDARWINChInfo::toChType
CDAQDARWINChInfo::toFlag CDAQDARWINChInfo::toStatus
CDAQDARWINDataInfo::setStatus
Syntax
void setStatus(int iDataStatus);
Parameters
iDataStatus Specify the data status.
Description
Stores the data status field of the data member to the specified value.
CDAQDARWINDataInfo::toAlarmType
Syntax
static int toAlarmType(const char * strAlarm);
Parameters
strAlarm Specify the name of the alarm type.
Description
Converts the specified string into an alarm type.
Returns ìNo alarm”if the outside the range.
Return value
Returns the alarm type.
7.4 Details of the DARWIN Class